Quality certificate

Description:	Al Wire Rods produced by continuously casting by process of Properzi technology.
Temper:	H 11 – H 14
Standard:	EN 1715-1, ASTM B-233
Alloy:	EN AW 1370
Diameter wire rod:	9,5 mm.

Temper	Tensile, MPa	Elongation, %	Resistivity, Оm*mm^2/m	Chemical composition, % weight.
				AL	Cu	Mg	Fe	Si	Zn	Ti+Mn+Cr+V	Ga
H-11	89-97	≥25	≤0,0280	≥99,70	≤0,003	≤0,01	≤0,15	≤0,08	≤0,01	≤0,01	≤0,01
H-12	98-104		≤0,0280	≥99,70	≤0,003	≤0,01	≤0,15	≤0,08	≤0,01	≤0,01	≤0,01
H-13	105-109		≤0,0280	≥99,70	≤0,003	≤0,01	≤0,15	≤0,08	≤0,01	≤0,01	≤0,01
H-14	≥110		≤0,0281	≥99,70	≤0,003	≤0,01	≤0,15	≤0,08	≤0,01	≤0,01	≤0,01

Packing	Weight, kg.	Outer diameter, mm	Inner diameter, mm	Width, mm
Coil, type 1 layer wound	1300-1600	1300	600	620
Coil, type 2 layer wound	1300-1600	1300	600	830